• home
  • Publications
  • International Journal


International Journal


[1] J. H. Lim, E. H. Lee (2022). “A simplified anisotropic yield function not requiring parameter optimization for sheet metals”, International Journal of Precision Engineering and Manufacturing, 23, pp. 67–78.

[2] T. H. Kim, S. H. Park, E. H. Lee, Y. H. Kang, J. Ha (2022). “A new mechanical cold trimming process assisted by dashed lined infrared heat treatment of martensitic steel considering energy efficiency”. Int. J. precision. Eng. Manu. - Green Tech (Accepted, Online available).

[3] E. H. Lee, M. B. Rubin (2022). Eulerian constitutive equations for the coupled influences of anisotropic yielding, the Bauschinger effect and the strength-differential effect for plane stressInt. J. Solids and Structures, 241, 111475.

[4] Y. D. Shim, E. H. Lee (2022). “An effective formability model of pearlitic steel wires in multi-stage drawing process based on the stress-based forming limit criterion”. Int. J. precision. Eng. Manu. (Accepted).

[5] T. H. Kim, J. H. Park, K. W. Jung, J. C. Kim, E. H. Lee (2022). Application of convolutional neural network to predict anisotropic effective thermal conductivity of semiconductor package. IEEE Access, 10, pp. 51995-52007.

[6] J. Lee, T. H. Kim, S. H. Jeon, S. H. Park, S. H. Kim, E. H. Lee, J. H. Lee (2022). "Automation of Trimming Die Design Inspection by Zigzag Process Between AI and CAD Domains". Engineering Applications of Artificial Intelligence, (Under review).

[7] E. H. Lee (2022). "Three-dimensional integral momentum balance based on inelastic evolution of microstructural vectors in Eulerian formulation", Applied Mathematics & Computation (Submitted).

[8] S. H. Oh, E. H. Lee (2022). “A new approach to modeling focused infrared heating based on quantum mechanical formulations”, Applied Sciences, 12, 3256. 

[9] E. H. Lee (2022). "Relativistic constitutive modeling of plastic deformation of material moving in space-time", International Journal of Engineering Science (Submitted).

[10] E. H. Lee (2022). "Strain-based asymmetric plastic potential for the plastic velocity gradient applicable to Lagrangian and Eulerian constitutive equations", International Journal of Plasticity (Under review).



[1] D. An, T. H. Kim, E. H. Lee (2021). “Analytical and experimental investigation into the relative influence of core and side parts on structures laminated by fused deposition modeling. Int. J. precision. Eng. Manu. - Green Tech, 8, 13-27.

[2] S. H. Park, E. H. Lee, H. Choi, J. Y. Lee (2021). “A thermal-elastic-plastic constitutive model using the radial basis function neural network and application for an energy efficient warm forming process. Int. J. precision. Eng. Manu, 22, 329-343. 

[3] E. H. Lee (2021). “An anisotropic stress-driven growth model for soft tissue based on Eulerian deformation tensor and growth potential. Acta mechanica, 232, 933-948.

[4] E. H. Lee (2021). “A model for irreversible deformation phenomena driven by hydrostatic stress, deviatoric stress and an externally applied field". International journal of engineering science, 169, 103573.

[5] E. H. Lee,  M. B. Rubin (2021). “Modeling inelastic spin of microstructural vectors in sheet metal forming”. Int. J. Solids and Structures, 225, 111067.

[6] E. H. Lee,  W. Choi (2021). “Asymptotic profile of solutions to the heat equation on thin plate with boundary heating”. Applied Mathematics and Computation, 408, 126356.

[7] E. H. Lee,  S. Baek (2021). “Plasticity and Enzymatic Degradation Coupled with Volumetric Growth in Pulmonary Hypertension Progression”. Journal of Biomechanical Engineering, 143, 111012.

[8] E. H. Lee (2021). A Review on Applications of Infrared Heating for Food Processing in Comparison to Other Industries. Innovative Food Processing Technologies: A Comprehensive Review, vol. 2. Elsevier, pp. 431–455.



[1] E. H. Lee, W. S. Kim (2020). “Electrical-thermal-mechanical analysis of focused infrared heating process. Int. J. precision. Eng. Manu. - Green Tech, 7, 885-903.

[2] E. H. Lee,  M.B. Rubin (2020). “Modeling anisotropic inelastic effects in sheet metal forming using microstructual vectors -- Part I: Theory”. Int. J. Plasticity, 134, 102783

[3] K. Y. Kim, E. H. Lee, S. H. Park, Y. H. Kang, J. Y. Park, H. Y. Lee, C. H. Moon, K. Kim (2020). "An Infrared Local-Heat-Assisted Cold Stamping Process for Martensitic Steel and Application to an Auto Part". Metals, 10(11), 1543

[4] E. H. Lee (2020). “A study on the effect of Young’s modulus modeling on the energy conservation in elastic-plastic material computation”. Int. J. precision. Eng. Manu., 21(10), 1875-1884

[5] T. H. Kim, E. H. Lee (2020). “Planar reinforcement by sheet type stiffeners for fused deposition modeling”. J. Mech. Sci. Tech., 34, 4201-4209

[6] E. H. Lee, T. H. Kim (2020). "A topology optimization of elastoplastic behavior conditions by selectively suppressing plastic work". Mathematics, 8(11), 2062 



[1] E. H. Lee, H. S. Choi, T. B. Stoughton, J. W. Yoon (2019). “Combined anisotropic and distortion hardening to describe the Bauschinger and directional hardening response.” Int. J. Plasticity., 122, 73-88



[1] E. H. Lee, T. B. Stoughton, J. W. Yoon (2018). “Kinematic hardening model considering directional hardening response.” Int. J. Plasticity., 110, 145-165

[2] E. H. Lee, J. W. Yoon, D. Y. Yang (2018). “Study on springback from thermal-mechanical boundary condition imposed to V-bending and L-bending processes coupled with infrared rays local heating. Int. J. Mater. Forming, Int. J. Mater. Forming, 11, 417–433

[3] E. H. Lee, D. Y. Yang (2018). "Design and analysis of infrared heating with overlapping heater array scheme for industrial application. Heat transfer Eng., 39(15), 1344-1354



[1] E. H. Lee, T. B. Stoughton, J. W. Yoon (2017). “A new strategy to describe nonlinear elastic and asymmetric plastic behaviors with one yield surface.” Int. J. Plasticity., 98, 217-238.

[2] E. H. Lee, D. Y. Yang, J. W. Yoon, W. H. Yang (2017). "A manufacturing process using the infrared ray local heating method for seat cross members." Int. J. Adv. Manuf. Tech., 89, pp. 3299-3305.

[3] E. H. Lee, D.Y. Yang, S. J. Ko (2017). “A study on infrared local heat treatment for AA5083 to improve formability and automotive part forming.” J. Mater. Eng. Perform. 26(10), 5056-5063.

[4] E. H. Lee, T. B. Stoughton, J. W. Yoon (2017). “A yield criterion through coupling of quadratic and non-quadratic functions for anisotropic hardening with non-associated flow rule.” Int. J. Plasticity., 99, 120-143.



[1] E. H. Lee, D. Y. Yang (2015). "Experimental and numerical analysis of a parabolic reflector with a radiant heat source." Int. J. Heat Mass Transfer, 85, pp. 860-864.

[2] E. H. Lee, D. Y. Yang, J. W. Yoon, W. H. Yang, (2015). "Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating." Int. J. Solids Struct., 75-76, pp. 211-224.



[1] E. H. Lee, D. Y. Yang, W. H. Yang (2014). "Numerical modeling and experimental validation of focused surface heating using near-infrared rays with an elliptical reflector." Int. J. Heat Mass Transfer, 78, pp. 240-250.

[2] E. H. Lee, J. S. Hwang, C. W. Lee, D. Y. Yang, W. H. Yang (2014). "A local heating method by near-infrared rays for forming of non-quenchable advanced high-strength steels." J. Mater. Process Tech., 214(4), pp. 784-793.